BJTGR - ABLEBOND 84-3

  • MSDS: BJTGR
  • Manufacturer: ABLESTIK LABORATORIES
  • Product Name: ABLEBOND 84-3
  • National Stock Number: 8040-00F013930
Product Identification

Product ID:ABLEBOND 84-3
MSDS Date:01/11/1988
FSC:8040
NIIN:00F013930
MSDS Number: BJTGR

Responsible Party
ABLESTIK LABORATORIES
833 WEST 182ND STREET
GARDENA, CA 90248

Emergency Phone: (213) 532-9341

Info Phone: (213) 532-9341

Cage: 9V874

Contractor
ABLESTIK LABS SUB OF NATIONAL STARCH AND CHEMICAL
COMPTON, CA 90221 US

Telephone: 310-764-4600

Cage: 21109

Ingredients

1,4-BUTANE DIGLYCIDYL ETHER, DIEPOXIDE

CAS: 2425-79-8

RTECS: EJ5100000


AROMATIC AMINE

Hazards

LD50 LC50 Mixture:ORAL RATS LD50 = 1,410 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL. SKIN: IRRITATION
& SENSITIZATION. EYES: IRRITATING. INGESTION: MODERATE POTENTIAL
FOR ORAL TOXICITY IS EXPECTED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION & SENSITIZATION. EYES:
IRRITATING. INGESTION: MODERATE POTENTIAL FOR ORAL TOXICITY IS
EXPECTED.
Medical Cond Aggravated by Exposure:SENSITIZATION.

First Aid

First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:CC
Flash Point:280F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:CORROSIVE LIQUID.

Accidental Release

Spill Release Procedures:WIPE UP W/SOLVENT SATURATED TOWELING & COLLECT
IN AN APPROPRIATE CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:STORE REFRIGERATED AT ALL TIMES. AVOID
CONTACT W/SKIN, EYES & CLOTHING. GOOD HOUSKEEPING IS REQUIRED.
AVOID INHALATION OF VAPORS.
Other Precautions:VENT CURING OVEN TO OUTDOORS.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPORS RESPIRATOR IF
NEEDED.
Ventilation:USE ADEQUATE VENTILATION. LOCAL EXHAUST IS RECOMMENDED WHEN
APPROPRIATE TO CONTROL EMPLOYEES EXPOSURE.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES W/SIDESHIELDS
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:GOOD HOUSEKEEPING IS REQUIRED.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.7
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE PASTE; ESSENTIALLY ODORLESS.
Percent Volatiles by Volume:<1%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO, CO2, & ALDEHYDES
Conditions to Avoid Polymerization:IF THIS PRODUCT ISN'T USED FOR THIN
BOND LINE APPLICATION, VIOLENT CHEMICAL REACTION CAN RESULT.

Disposal

Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES W/ALL LOCAL, STATE & FEDERAL REGULATIONS.
CORROSIVE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.